High snr mode (high signal noise ratio), Chapter, Er: see – ALLIED Vision Technologies Pike F-1600 User Manual
Page 354: Table, Advanced register: high signal noise ratio (hsnr), Table 175: advanced register: high signal noise, Ratio (hsnr)
Configuration of the camera
PIKE Technical Manual V5.1.2
354
High SNR mode (High Signal Noise Ratio)
With High SNR mode enabled the camera internally grabs GrabCount images
and outputs a single averaged image.
Note
When SOFT_RESET has been defined, the camera will respond
to further read or write requests but will not process them.
Register
Name
Field
Bit
Description
0xF1000520
HIGH_SNR
Presence_Inq
[0]
Indicates presence of this feature
(read only)
---
[1..5]
Reserved
ON_OFF
[6]
High SNR mode on/off
The camera must be idle to toggle
this feature on/off. Idle means: no
image acquisition, no trigger.
Set grab count and activation of
HighSNR in one single write
access.
---
[7..22]
Reserved
GrabCount
[23..31]
Number of images (min. 2)
2
n
images with n=1..8 (automati-
cally)
Table 175: Advanced register: High Signal Noise Ratio (HSNR)
Note
•
The camera must be idle to toggle this feature on/off.
Idle means: no image acquisition, no trigger.
•
Set grab count and activation of HighSNR in one single
write access.