ALLIED Vision Technologies Pike F-1600 - Manual (Page 209)

Controlling image capture
PIKE Technical Manual V5.1.2
209
The functionality is controlled via bit [6] and bitgroup [12-15] of the following
register:
Register Name Field Bit Description
0xF0F00830 TRIGGER_MODE Presence_Inq [0] Presence of this feature:

0: N/A

1: Available
Abs_Control [1] Absolute value control

O: Control with value in the Value field 1:
Control with value in the Absolute value CSR

If this bit = 1 the value in the Value field has
to be ignored
--- [2..5] Reserved
ON_OFF [6] Write: ON or OFF this feature

Read: read a status

0: OFF

1: ON

In this bit = 0, other fields will be read only.
Trigger_Polarity [7] Select trigger polarity

(Except for software trigger)
If Polarity_Inq is 1:

Write to change polarity of the trigger input.

Read to get polarity of the trigger input.
If Polarity_Inq is 0:

Read only.
0: Low active input

1: High active input
Trigger_Source [8..10] Select trigger source
Set trigger source ID from trigger source
ID_Inq
Trigger_Value [11] Trigger input raw signal value

read only
0: Low

1: High
Trigger_Mode [12..15] Trigger_Mode
(Trigger_Mode_0..15)
--- [16..19] Reserved
Parameter [20..31] Parameter for trigger function, if required
(optional)
Table 66: Trigger_Mode_15 (Bulk Trigger)