ALLIED Vision Technologies Bonito CL-400 200 fps - Manual (Page 11)

Introduction
Bonito Technical Manual V2.3.0
11
Caution

Surge
To avoid damage caused by surge, connect the camera to an
AC/DC power supply. Use a certified industrial power supply
that complies with common industrial standards. Make sure
the polarization of the power supply is correct.
For the DC (direct current) signal, use cable lengths less
than 30 m. Consider that the voltage drop increases with the
cable length.
AVT (or your local dealer) provides suitable power supplies:
http://www.alliedvisiontec.com/emea/products/
accessories.html