Dual channel, full line length – ALLIED Vision Technologies Bonito CL-400 200 fps User Manual
Page 36
Advertising
Camera Link interface (01-04 or CL1, CL2)
Bonito Technical Manual V2.3.0
36
Dual channel, full line length
The charts below illustrate the Camera Link timing for dual channel mode (full
line length,
S=1), in continuous mode (M=0). The frame gap may vary in other
trigger modes. Additionally, the number of active lines per frame can be config-
ured by the user (parameter
N).
Note
The diagrams displayed are not applicable for the Bonito CL-
400B/C 200fps cameras.
Figure 19: Line timing for dual channel mode (full line length,
S=1)
Figure 20: Frame timing for dual channel mode (full line length,
S=1)
Advertising
This manual is related to the following products: