ALLIED Vision Technologies Bonito CL-400 200 fps - Manual (Page 35)

Camera Link interface (01-04 or CL1, CL2)
Bonito Technical Manual V2.3.0
35
Timing (FVAL, LVAL, PCLK)
The Camera Link pixel clock frequency of the Bonito is 80 MHz.
The 10-tap configuration transfers 10 pixels per clock cycle at once, or 20 pixels
per clock cycle in the dual-channel mode). The synchronization signals LVAL
(line valid) and FVAL (frame valid) are used to designate valid data output.
Single channel mode
The charts below illustrate the Camera Link timing for single channel mode
(
S=0), in continuous mode (M=0). The frame gap may vary in other trigger
modes. Additionally, the number of active lines per frame can be configured by
the user (parameter
N).
Figure 17: Line timing for single channel mode ( S=0)
Figure 18: Frame timing for single channel mode ( S=0)