Manual overview – ALLIED Vision Technologies Bonito CL-400 200 fps User Manual
Page 8
Introduction
Bonito Technical Manual V2.3.0
8
Manual overview
This manual overview outlines the contents of each chapter of this manual.
•
Contacting Allied Vision Technologies
on page 5 lists AVT contact
data (phone number and URL) for both:
– Technical information / ordering
– Commercial information
•
on page 6 (this chapter) gives you the document his-
tory, a manual overview (short description of each chapter) and conven-
tions used in this manual (styles and symbols).
continued from previous page
V2.2.1
(continued)
11 May 2012
(continued)
•
Added example drawing: see
circuit from +/- 6 V RS232 output to 5 V TTL input
•
Added information to use exact multiples oft the current line
duration: see chapter
•
Changed +/-2 t
L
to t
L
in Table 13: Exposure control modes:
Exposure timing mode (bit group: e) on page 42
•
Added rising edge description (bit group e, value=2): see
Image on demand mode (IOD) with exposure timer on page
43
•
Added more precise description of PIV mode: see PIV mode =
On on page 45
•
•
V2.3.0
2013-Sep-30
•
Updated RoHS (2002/95/EC) to RoHS (2011/65/EU)
•
Added „Surge“ warning as requested for the EMC lab test
•
Corrections derived from terminology alignment
•
Change of font, necessary due to changes in typeface
•
Redesigned the complete PIV mode description, added flow
diagram and table
•
Redesigned the biggest part of the Exposure Mode Control
description, incl. new tables and flow diagrams
•
Redesigned the Baud Rate description
•
Introduced overview of value ranges, default values and
examples for each parameter described in the chapter
•
Replaced the drawings with new drawings that show all four
sides of the camera in chapter
Version
Date
Remarks
Table 1: Document history