ALLIED Vision Technologies Bonito CL-400 200 fps - Manual (Page 47)

Parameters and commands
Bonito Technical Manual V2.3.0
47
Since all of the sub-fields are set using the parameter M, it is only possible to set
all of them at the same time. The value of M is calculated as the aggregate sum
of the hexadecimal values that are set to each of the three sub-fields.
The table below shows the hexadecimal weights that can be set for each sub-
field. To work out the final value for
M, select a setting for each sub-field, then
add up the corresponding hexadecimal values.
See the following pages for detailed explanation of each sub-field.
Examples M=0 (Default)
Sets the bit field to „- - 0 0 - 0 0 0“
• Activates Continuous mode (weight = 0)
• Deactivates PIV mode (weight = 0)
• Activates Standard exposure feature mode (weight = 0)
M=21
(0x21 = 0b100001), sets the bit field to „- - 1 0 - 0 0 1“
• Activates Image on demand mode (IOD) (weight = 1)
• Deactivates PIV mode (weight = 0)
• Activates Permanent exposure mode (weight = 20)
M=22
(0x22 = 0b100010), sets the bit field to „- - 1 0 - 0 1 0“
Bit values Setting Weight
(hexadecimal)
Exposure timing mode
--xx-x00 Continuous mode 0
--xx-x01 Image on demand mode (IOD) 1
--xx-x10 Image on demand mode (IOD)
with exposure timer
2
--xx-x11 Image on demand mode (IOD)
with exposure timer and frame duration timer
3
PIV mode
--xx-0xx PIV mode off 0
--xx-1xx PIV mode on 4
Exposure feature mode
--00-xxx Standard mode 0
--01-xxx Enhanced full well (3T) mode 10
--10-xxx Permanent exposure mode 20
--11-xxx Reserved value 30
Table 11: Exposure control mode: values for each setting