eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 19)

119
After you configure a user's layouts, you may want to limit that user's privileges.
Layouts ribbon modes
EyStream has two types of layouts: standard and custom (see Switching between layout types ).
The standard layouts are an automatically defined set of layouts. Standard layouts cannot be
created, deleted, or edited. Each button on the layouts ribbon represents a group of layouts of the
same type. The layouts in a group differ only in the video cameras contained within them. If a
group of layouts contains more than one layout, then a context menu will become accessible for
that group. The operator can use this context menu to select layouts in the group or to launch a
cyclical slideshow of layouts in that group.
In standard layouts ribbon mode, the following modes are available: 1x, 4x, 9x, wide-frame, and
others.
Custom layouts are layouts created manually based on standard layouts. Custom layouts can be
created, edited, and deleted.
Switching between layout types
When working with EyStream, the user can choose either a standard layout or a user-defined
layout. To switch between these types of layouts, perform the following:
1. Go to Settings Options User interface (1–2).
eLineTechnology.com 303.938.1133