eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 3)

103
Perform the follow actions for the Sensor detection tool, on the Detection Tools tab:
1. Check triggering of the detection tool with the help of the Triggers ribbon (optional) (see the
section Checking the Triggering of a Detection Tool .
2. Set the rules to be automatically executed when the detection tool is triggered (see the
section titled Configuring Automatic Rules ).
Checking the Triggering of a Detection Tool
You can check the triggering of detection tools in the Detection Tools tab.
To use this option you must perform the following steps:
1. In the Detection Tools list, highlight the detection tool object whose triggering you need to
check.
Attention!
The Detection Tool object should be enabled and configured
2. Produce an event whose occurrence should trigger the detection tool: motion in the frame,
turning the video camera, providing sound to an audio device, etc.
3. If the detection tool is configured correctly, video image frames from the video camera
corresponding to the detection tool will be displayed on the trigger ribbon with the time they
were received indicated.
eLineTechnology.com 303.938.1133