eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 86)

186
Attention!
In the archive and alarm management modes, clicking an event will switch the
view to the live video mode.
Selecting a Video Camera Using the Context Menu of the Viewing Tile
To select a video camera using the context menu of the viewing tile, you must perform the
following steps:
1. Bring up the context menu in the viewing tile (1).
2. Choose Camera selection (2).
3. Select the necessary video camera in the displayed list using one of the following methods:
a. If the necessary video camera is included in a group, you must first select the group
(the group may also contain subgroups), then select the video camera.
b. If the necessary video camera is not included in one of the groups, you must select
the list of all video cameras that follows the list of groups.
eLineTechnology.com 303.938.1133