eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 55)

155
2. The maximum allowed reaction time to an alarm is the length of time from the moment the
operator who accepted an alarm for processing exits alarm mode, after which the alarm
returns to New status, and the count for the allowed time for ignoring an alarm begins
again.
Note
For example, an operator can exit alarm mode to view the video archive related
to the alarm
To configure alarm handling in the system, you must perform the following steps:
1. Go to Settings Options Alarm processing (1-2).
2. In the Alarm pending time group, enter the time in seconds during which it is necessary
to accept the alarm for processing before it is assigned the Unclassified status (3).
3. In the Operator's idle time field, enter the time in seconds during which an operator who
accepted an alarm for processing and exited alarm mode without evaluating it must return
to alarm mode (4).
4. Click the Apply button.
Configuration of alarm handling is now complete.
Configuring schedules
A schedule consists of all the time intervals for which video streams from video cameras will be
recorded to archive.
Creating schedules
To create a schedule, complete the following steps:
1. Go to Settings Options Scheduled recording (1-2).
2. Under List of schedules, click the Create... field and enter the name of the schedule (3)
eLineTechnology.com 303.938.1133