eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 44)

144
To turn off display of error messages, you must perform the following steps:
1. Go to Settings Options User interface (1–2).
2. Clear the Show error messages check box (3).
3. Click Apply to save the changes.
After you complete these actions, error messages will no longer be displayed.
Configuring previews of alarm events
You can disable previews of alarm events in the viewing tile.
To do this, follow the steps below:
1. Go to Settings Options User interface (1–2).
eLineTechnology.com 303.938.1133