eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 27)

127
Once you have selected a group, the video camera panel will display only those video
cameras that are included in the selected group.
2. Enter video camera's name or part of it into the search field (2).
The search starts automatically and all cameras with that name will be displayed in the Video
camera panel.
Note
A video camera is displayed on the video camera panel only once. If you selected
a group containing subgroups that all include a specific video camera, that video
camera will be displayed on the video camera panel only once.
Note
If you selected a group containing subgroups, the video camera panel will display
the video cameras included in that group as well as the cameras in all subgroups
of that group.
To display the image from a selected camera in the viewing tile, perform one of the following
sequences of actions:
1. Shift the given viewing tile into active mode (with a mouse click) and select the video
camera from the list on the video camera panel.
2. Select the video camera from the list on the video camera panel by clicking it with the
mouse and, while holding down the mouse button, move the cursor to the viewing tile and
then release the mouse button.
The image from the selected video camera will then be displayed on the viewing tile.
Selecting video stream quality in a viewing tile
If a video camera supports multistreaming, you can select the quality of the video stream that you
want for display in viewing tiles.
Note
If the video camera is not configured for multiple video streams, this action is not
available (see
The Video Camera Object ).
To select video stream quality:
1. In the context menu of the viewing tile, select Select quality.
eLineTechnology.com 303.938.1133