eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 75)

175
2. In this window, select the Set current position check box (2). The time parameters in the
Set current position group, which determine the position of the timeline indicator, will
become available for editing.
3. Position the cursor over the desired time parameter (day of the week, date, month, year,
hour, etc.) (2). Arrows for increasing () and decreasing () the selected parameter then
appear. To change the parameter by one unit, click the corresponding arrow once. Repeat
this step to modify all desired time parameters.
4. Click the Apply button.
Note
To close the window without saving changes, click Cancel or
.
Setting the timeline indicator in the desired position is now complete.
Scrolling and Zooming the Timeline
A limited section of the timeline is displayed in the Monitor interface window.
To scroll and zoom the timeline, you must perform the following steps:
1. Click the button (1). The Archive position selection window will then appear.
eLineTechnology.com 303.938.1133