eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 26)

126
Selecting a Video Camera Using the Context Menu of the Viewing Tile
To select a video camera using the context menu of the viewing tile, you must perform the
following steps:
1. Bring up the context menu in the viewing tile (1).
2. Choose Camera selection (2).
3. Select the necessary video camera in the displayed list using one of the following methods:
a. If the necessary video camera is included in a group, you must first select the group
(the group may also contain subgroups), then select the video camera.
b. If the necessary video camera is not included in one of the groups, you must select
the list of all video cameras that follows the list of groups.
The image from the selected video camera will now be displayed in the viewing tile.
Selecting a Video Camera Using the Viewing Tile Preview Ribbon
The video camera panel is used to display a list of video cameras linked to EyStream.
Note
By default, the video cameras panel does not display any video cameras (Not
selected status)
You can search for a camera either by:
1. Click the Not selected
from the displayed list.
drop-down list (1) and select the necessary video camera group
eLineTechnology.com 303.938.1133