eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 69)

169
4. Alarms list.
5. Playback panel.
The archive navigation panel is used for the following functions:
1. Navigating through the archive.
2. Playing back recordings.
3. Selecting playback mode: forward or backward.
4. Setting playback speed.
5. Selecting alarms for display on the timeline and in the alarm events list.
6. Viewing the list of alarm events of the selected type.
The Alarm Events Filter
The Events filter component is used to select the type alarm events to be displayed on the
archive navigation panel.
To select a type of alarm events, you must perform the following steps:
1. Click the Events filter button (1). The Events filter window will then be displayed (2).
2. Select the check boxes for the types of alarms which should be displayed on the archive
navigation panel, according to their status:
a. Critical alarm
b. Non-critical alarm
c. False alarm
d. Unclassified alarm
3. Select the check boxes for the types of alarms which should be displayed on the archive
navigation panel, according to the cause of their initiation:
a. Initiated by operator
b. Initiated by video detection tool (basic, situation analysis, or embedded)
c. Initiated by audio detection tool (basic, situation analysis, or embedded)
d. Initiated by sensor
Note.
By default, all check boxes are already selected.
4. Click the Apply button.
Note.
To close the window without saving changes, click Cancel or
.
Selection of alarm events is now complete.
Events of the selected type will be displayed on the timeline (see the section titled The Timeline )
and in the alarm events list (see the section titled The alarms List ).
The Timeline
eLineTechnology.com 303.938.1133