Ec declaration of conformity, Ec.declaration.of.conformity – Burkert Type 8650 User Manual
Page 112
112
1.
EC DECLARATION OF CONFORMITY
We hereby declare that the products with the designation:
Electrical.and.Pneumatic.Automation.System.AirLINE.Ex.Type.8650
satisfy the requirements which are specified in the Council Directives to approximate the laws of the member
states:
•. Low.Voltage.Directive.(LVD).(2006/95/EC)
•. Electromagnetic.compatibility.Directive.(2004/108/EC)
•. Pressure.Equipment.Directive.(97/23/EC)
•. ATEX-Directive.(94/9/EC).
One or several of the following standards were used to assess the products concerning compliance with the Low.
Voltage.Directive.(2006/95/EG):
EN 50178
Electronic equipment for use in power installations
EN 60730-1
Automatic electrical controls for household and similar use - Part 1: General requirements
EN 60664-1
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, require-
ments and tests
EN 60204-1
Safety of machinery – Electrical equipment of machines - Part 1: General requirements
EN 60529
Degrees of protection provided by enclosures (IP code)
EN 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory use - Part
1: General requirements
Additional requirements for solenoid valves:
DIN VDE
0580
Electromagnetic devices and components - General specifications
One or several of the following standards were used to assess the products concerning the Directive.on.Elec-
tromagnetic.Compatibility.(2004/108/EC):
EN
61000-3-2
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions
(equipment input current <= 16 A per phase)
EN
61000-3-3
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage
fluctuations and flicker in public low-voltage supply systems, for equipment with rated current
<=16 A per phase and not subject to conditional connection.
EN
61000-6-2
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial
environments
EN
61000-6-4
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for
industrial environments
Type 8650
english
Annex