Burkert Type 8650 - Manual (Page 8)

8
3. BASIC SAFETY INSTRUCTIONS
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation, operation and maintenance of the devices.
• local safety regulations; the operator is responsible for observing these regulations, also with reference to the
installation personnel.
Danger.–.high.pressure!.
• Before loosening the lines and valves, turn off the pressure and vent the lines.
Risk.of.electric.shock!
• Before reaching into the device or the equipment, switch off the power supply and secure to prevent
reactivation!
• Observe applicable accident prevention and safety regulations for electrical equipment!
(It is permitted to replace electronic modules and valves even while the power is on.)
Verbrennungsgefahr/Brandgefahr.bei.Dauerbetrieb.durch.heiße.Geräteoberfläche!
• Das Gerät von leicht brennbaren Stoffen und Medien fernhalten und nicht mit bloßen Händen berühren.
General.hazardous.situations.
To prevent injury, ensure that:
• Do not supply aggressive or inflammable media to the media connections of the system.
• Do not supply fluids to the media connections of the system.
• In low-pressure applications ensure that no flammable or explosive media are drawn into the AirLINE-Ex system.
• Do not subject the housing to mechanical loads (e. g. by placing objects on the housing or using the
housing as a step).
• Do not cover the ventilation slots in the housing.
• The system cannot be activated unintentionally.
• Installation and repair work may be carried out by authorised technicians only and with the appropriate tools.
• After an interruption in the power supply or pneumatic supply, ensure that the process is restarted in a
defined or controlled manner.
• The device may be operated only when in perfect condition and in consideration of the operating instructions.
• The general rules of technology apply to application planning and operation of the device.
Type 8650
english
Allgemeine Informationen
Sicherheitshinweise