Burkert Type 8650 - Manual (Page 69)

69
6.2. Installation
Supply.segment
Pressure gauge module:
→
In the case of the pressure gauge module connect the hose to the pneumatic module before hooking in the
module (see figure: Hose connection of the pressure gauge module).
→
Hook module into the terminal module and swivel in until it engages.
→
Valve.segment
→
Hook electronic module into the terminal module.
→
Actuate locking element in the direction of the arrow and swivel in the module all the way.
→
Screw on valves (either depressurized or all affected locations with P-shutoff).
Hose connection
Fig. 12: Hose connection of the pressure gauge module
Type 8650
english
Installation