Burkert Type 8650 - Manual (Page 20)

20
1. CONFIGURATION
1.1. Maximum System Configuration
No. of modules up to 32 I/O modules / pneumatic modules
in the complete system Siemens SIMATIC ET 200iSP / Bürkert AirLINE Ex
At least 1 field bus interface module (IM152) and 1 power supply module each;
if required, these can be installed redundantly.
Valve positions up to 48 with 11 mm valves Types 6524/6525 (with a middle supply segment)
up to 32 with 16.5 mm valves Types 6526/6527 (with a middle supply segment)
Mixing 44 mm / 66 mm valve segments is possible.
Maximum width 1095 mm including all Siemens modules (one power supply and one interface)
1185 mm including all Siemens modules (two power supply and two interfaces)
Other limitations are possible due to the installation position and power considerations (see the Simatic ET
200iSP manual).
1.2. Configurator
With its high degree of modularity AirLINE Ex offers numerous degrees of freedom to adapt to a wide range of
application cases.
To adapt to your particular application as simply as possible, there is a PC-based configuration program available.
It is available from your Bürkert contact or you can download it directly from the Bürkert homepage (under Type
8650 software).
www.burkert.com
The configurator allows you
- to define the type and number of the required valve segments
- to define the required valve equipment
- to specify the required connections
- to use intermediate feed-ins
- to select options and accessories
- To add ET200iSP modules
At the same time the conformity is automatically checked with the applicable succession regulations.
As a result you will receive a storable parts list which you can use to inform your contact at Bürkert about the
exact configuration required.
Moreover, the configurator supplies technical basic data to the system which you require, e.g. weight, dimen-
sions, power loss, etc.
Type 8650
english
Configuration and Function