Burkert Type 8136 - Manual (Page 32)

Through this selection, the sensor is adapted perfectly to the product
and measurement reliability, particularly in products with poor
reflective properties, is considerably increased.
Enter the requested parameters via the appropriate keys, save your
settings with [OK] and jump to the next menu item with the [ESC] and
the [->] key.
In addition to the medium, also the application, i.e. the measuring site,
can influence the measurement.
With this menu item, the sensor can be adapted to the applications.
The adjustment possibilities depend on the selection "Liquid" or "Bulk
solid" under "Medium".
The following options are available when "Liquid" is selected:
The selection "Standpipe" opens a new window in which the inner
diameter of the applied standpipe is entered.
The following features form the basis of the applications:
Storage tank:
l Setup: large-volumed, upright cylindrical, spherical
Setup/Application
32 LEVEL TRANSMITTER 8136 • 4 … 20 mA/HART - two-wire
6 Set up with the indicating and adjustment module
41783
-EN
-120316