CognitiveTPG A760 - Manual (Page 101)

A760 User Guide: Programming Supplement
Chapter 4: Programming commands
101 Revision F January 2010
Second variation: length n specified at beginning of string. Except as noted, 0 < n < 256.
m Bar code d1...dn n
65 UPC-A 48–57 (ASCII numerals) Fixed length: 11, 12
66 UPC-E 48–57 Fixed length: 11, 12
67 JAN13 (EAN) 48–57 Fixed length: 12, 13
68 JAN8 (EAN) 48–57 Fixed length: 7, 8
69 CODE 39 48–57, 65–90 (ASCII alphabet), 32, 36, 37, Variable
43, 45, 46, 47 (ASCII special characters)
d1 = dk = 42 (start/stop code is supplied
by printer if necessary)
70 Interleaved 2 of 5 (ITF) 48–57 Variable (even number)
71 CODABAR (NW-7) 65–68, start code 48–57, 36, 43, 45, 46, 47, 58 Variable
72 Code 93 00–127 Variable
73 Code 128 0–105 d1 = 103–105 (must be a start code) Variable
d2 = 0–102 (data bytes) (Stop code is provided
by the printer)
74 Code 128 auto compress 0–255 Variable
00–FF
75 PDF 417 0–255 Variable length
00–FF
78 Code EAN 128 auto compress 0–255 Variable
00–FF
79 PDF 417 data length 0–255 Variable
specified via integer 00–FF
n = nH:nL 1D 6B m nL nH d1...dn
The value of m selects the bar code system as described in the table.
The variable d indicates the character code to be encoded into the specified bar code system. If character code d cannot be
encoded, the printer prints the bar code data processed so far, and the following data is treated as normal data.
Exceptions
Illegal data cancels this command.
PDF 417 format cannot be printed on the slip.
Bar codes on the slip are always LEFT justified.
Code 93 and PDF 417 are only available in A760 native mode.