CognitiveTPG A760 - Manual (Page 83)

A760 User Guide: Programming Supplement
Chapter 4: Programming commands
83 Revision F January 2010
Transmit paper sensor status
ASCII ESC v
Hexadecimal 1B 76
Decimal
27 118
Values:
Status Byte (RS-232C)
Bit Function
0 Signifies 1 Signifies
0 Receipt paper OK Low (only if
paper low
sensor is
(enabled)
1 Receipt cover Closed Open
front cover
2 Receipt paper OK Out
3 Always zero Always zero*
4 Always zero
5 Slip leading Not covered Covered
edge sensor
6 Slip trailing Not covered Covered
edge sensor
7 Always zero OK Always zero*
*The printer does not process ESC v until an error condition
is cleared.
Sends status data to the host computer. The printer sends
one byte to the host computer when it is not busy or in a
fault condition. In DTS/DSR protocol, the printer waits for
DSR = SPACE.
Related information
See real time commands, in this document for details
about fault conditions reporting.