CognitiveTPG A760 - Manual (Page 20)

A760 User Guide: Programming Supplement
Chapter 3: Programming the Printer 20 Revision F January 2010
LogoEZ ® colorization commands
Hexadecimal ASCII Description
1F 03 16 fm n o p q US ETX SYN Set LogoEZ ® surround graphics
1F 03 16 f s p/r t US ETX SYN f s p/r t Set colorization
1F 03 17 a m s US ETX ETB a m s Set attribute mapping
Note: The new CognitiveTPG LogoEZ ® colorization utility provides you a fast and easy way
do get basic two-color and logos on your receipt without having to enter commands.
Check out the CognitiveTPG Web site at www.CognitiveTPG.com.
Ethernet setup commands
For the printer to operate with the Ethernet interface, a series of commands must be set within
the printer. These commands can only be set through the host computer with the printer in flash
download (boot) mode and are not configurable through the printer setup configuration menu. See
page 15 for default setup or command descriptions on page 134.
Hexadecimal ASCII Discription
1B 5B 7D ESC [ } Switch to boot mode
1F 08 00 US BS NUL Restore default settings
1F 08 01 n1 n2 n3 n4 US BS SOH n1 n2 n3 n4 Set IP address
1F 08 02 n1 n2 n3 n4 US BS STX n1 n2 n3 n4 Set net mask
1F 08 03 n1 n2 n3 n4 US BS ETX n1 n2 n3 n4 Set gateway
1F 08 04 n1 n2 n3 n4 US BS EOT n1 n2 n3 n4 Set raw TCPIP port 9001
1F 08 05 n1 US BS ENQ n1 LP Daemon
1F 08 06 n1 US BS ACK n1 Telnet Daemon
1F 08 07 n1 US BS BEL n1 BootIP
1F 08 08 n1 US BS BS n1 DHCP (auto-configuration)
1F 08 09 n1 US BS HT n1 Inactivity time-out
1F 08 0A n1 US BS LF n1 Keep-alive pings (arps)
Character appearance
The appearance of text can be changed using the following print modes:
• Standard
• Compressed
• Double-high
• Double-wide
• Upside-down
• Rotated
• Underlined
• Bold
• Reverse
• Italic
• Strike-through
• Scaled
• Shading