CognitiveTPG A760 - Manual (Page 130)

A760 User Guide: Programming Supplement
Chapter 4: Programming commands 130 Revision F January 2010
Return paper type description (ColorPOS ® )
ASCII GS Ox8F m
Hexadecimal 1D 8F m
Decimal
29 143 m
Value and range of m: m is the paper type index,
(0< = m< = 15)
This command will return from flash memory a paper type
description indexed by m, (0<=m<=15) sending back the
data sequence used in the download paper type description
command, i.e. the return is
1D 8F m nL nH
(d1…dn) which was stored in slot m; or a value of n =
0 if slot m does not have a description stored. m = 0 x ff
asks for a return of the current paper type. For all valid
descriptions, the last two bytes will be a CRC value and
the first 24 bytes will be as follows:
# Bytes Offset Definition
1 0 Manufacturer paper type category
1 1 Version in type category
1 2 Printhead type
1 3 Structure format type
20 4 Descriptive name as a
null terminated ASCII string
Reset firmware
ASCII GS (SPACE)
Hexadecimal 1D FF
Decimal
29 255
Ends the load process and reboots the printer. Before executing this command, the printer should
have firmware loaded and external switches set to the runtime settings. Application software for
downloading should prompt the user to set the external switches and confirm before sending this
command. If the downloading was started from a diagnostic, the reboot will cause the printer to
re-enter download state unless the external switches are changed.