CognitiveTPG A760 User Manual
Page 68
A760 User Guide: Programming Supplement
Chapter 4: Programming commands
68
Revision F January 2010
Print raster color graphics (ColorPOS
®
)
ASCII
GS 0x83 n1…..n144 (576 dots 80 mm paper) / n160 (640 dots, 82.5 mm paper)
Hexadecimal 1D 83 n1…..n144 (576 dots 80 mm paper) / n160 (640 dots, 82.5 mm paper)
Decimal
29 13 n1…..n144 (576 dots 80 mm paper) / n160 (640 dots, 82.5 mm paper)
Value and range of n: n1 to n144 / n160 corresponds to one dot row data.
For each printed dot row starting at the top left, two-part
bit strings are used to define (in the first half), all dots that
are of either color (i.e. not white). The second half string
defines only the dots where the color = black. Thus all dots
which are on in the first half string but not on in the second
half string, select the secondary color. The parameter of
this command is thus a string of bytes for one dot row with
the same structure as defined for the thermal color format
file given in the download color
logo command.
This command is used for printing a single raster of color
graphics in real-time. Offsets, page and any other modes
or overlays, including watermark, and current color do
not apply to this command. A complete rendering of the
intended final image has to be done by the application
before sending the dot rows.
��
��
��
���
������
���
���
���
���
�������
������������������
��������������������
�
���
���