CognitiveTPG A760 User Manual
Page 44
A760 User Guide: Programming Supplement
Chapter 4: Programming commands
44
Revision F January 2010
ASCII
ETB
Hexadecimal 17
Decimal
23
Prints one line from the buffer and feeds paper one line. Executes LF on receipt. Executes LF on
slip if previous character was not a CR.
Print and feed paper
ASCII
ESC J n
Hexadecimal 1B 4A n
Decimal
27 74 n
Value of n:
Receipt - n/203 inch
Slip -
n/144 inch
Range of n:
0–255
Prints one line from the buffer and feeds the paper.
On the receipt station, the line height equals the character
height when n is too small. This does not apply to the slip
station. Use n = 0 to printer a line without feeding the
paper. This allows the printer to print on the last line of the
slip (at 0.59 inch from the trailing edge) and still retain the
slip in the feed rollers for reverse feeding the paper back
out of the slip station.
Related information
For more information, see the description of the set
horizontal and vertical minimum motion units command
in this document.
Print and reverse feed paper
ASCII
ESC K n
Hexadecimal 1B 4B n
Decimal
27 75 n
Value of n:
Slip - n/144 of an inch
Range of n:
0–255
Prints one line from the buffer and reverse feeds the paper
n/144 of an inch on the slip station.
Exceptions
The receipt station cannot be reverse fed.
Print and feed n lines
ASCII
ESC d n
Hexadecimal 1B 64 n
Decimal
27 100 n
Value of n:
Number of lines to be printed and fed.
Range of n:
1–255 (0 is interpreted as 1 on the
receipt station)
Prints one line from the buffer and feeds paper n lines at
the current line height.