Guest communication, Granting or denying access, Call waiting – Controlled Products Systems Group 1834-080 User Manual

Page 71: Privacy, Access code, Resident instruction sheet

Advertising
background image

Resident Instruction Sheet

1835-065-R-10-11

Page

71

 
Your  building  /  community  has  been  equipped  with  a  DoorKing  Telephone  Entry  System  that  will  provide 
communication  for  your  guest  from  the  lobby  door  /  gated  entrance  to  your  home  by  use  of  the  local  telephone 

etwork.    If  you  have  any  questions  regarding  the  use  or  operation  of  this  system,  please  see  your  system 

er / HOA representative) or call 

n
administrator (building manag
 

Guest Communication

Your name (or apartment number) and telephone number have been programmed into the telephone entry system 
under a specific DIRECTORY CODE.  This directory code can be from 1 to 4 digits long depending on the needs of the 
application.  When a guest comes to visit you, they will look your name in a directory.  Your DIRECTORY CODE will be 
shown to the right of your name.  Your guest will enter this code on the system keypad that will cause the system to 
place a call to your home (If your guest already knows your directory code, they can simply enter the code on the 

eypad without having to look up your name).  Some systems are equipped with a CALL button.  When your name is 

uest can press the CALL button to establish communication with your home. 

k
displayed in the directory, the g
 

Granting or Denying Access

Once you have answered the phone call and you have identified your guest, you have the choice to either grant access 
or deny access to your guest. 
To grant access to your guest, press           on your touch‐tone telephone.  The telephone entry system will respond 
with a confirmation tone indicating that the door or gate is opening and will automatically disconnect itself.  Some 

one when the number is pressed.  If your telephone does this, you may 

uccession to open the door or gate. 

newer telephones emit a very short duration t
have to press the open number twice in rapid s
To deny access to your guest, press the # key. 

otary Phone Only.  If you have a rotary dial phone, dial 9 to grant access.  To deny access, hang up. 

R
 

Call Waiting

If you are on the telephone when a guest tries to contact you from the telephone entry system, they will hear a busy 
signal and will have to wait for you to end your call before they can contact you.  To eliminate this problem, you can 
order call waiting from your local telephone company. 

Privacy

If  you  do  not  want  your  name  and/or  apartment  number  listed  in  the  electronic  directory,  inform  the  system 
administrator of this.  Your telephone number can be stored in the system without your name being displayed on the 
directory.  If you choose this option, you will need to inform your guest of your directory code, otherwise they will 
have no method of contacting you from the entry of your building / community through the telephone entry system. 

Access Code

Your system may be equipped with an access code that will allow you to open the door / gate by entering this code 
on the system keypad.  Your system administrator will advise you of your access code if this option is available.  To 
use the access code, first press the # key, and then enter the four digit code. 

 
 
 
System Administrator ­ Fill in the blanks above and copy this instruction sheet for your residents. 

Advertising
This manual is related to the following products: