SKC DataTrac for the Leland Legacy - Manual (Page 23)

20
SKC Pump Scheduler
Figure 25.
Scheduler Set Flow Window
Figure 24.
Set Flow
Button
FromPump Button
To display a Pump Schedule from a previously programmed pump, click on the
FromPump butt on (Figure 20).
Time Bump Buttons
To increase or decrease all program start and stop times in the Pump Schedule, click
on the Time Bump butt ons (Figure 32).
Save a Program (File Menu)
To save information from the Pump Schedule to a PC as a program fi le, select the
Save command from the File menu.
The default extension “.pgm” is used to indicate Pump Schedule fi les.
Open Program (File Menu)
To open a previously stored program, select Open from the File menu.
Print Program (File Menu)
To print the Pump Schedule information displayed on the screen, select Print from
the File menu.
Set Flow Button
The Set Flow butt on (Figure 24) opens the Scheduler Set Flow
window (Figure 25) to allow the user to set the pump fl ow rate.
Scheduler Set Flow Window
The Scheduler Set Flow window (Figure 25) allows the user to
select the pump fl ow rate using the numbered fl ow butt ons and
the scroll bar.
Select Flow Rate
To set the fl ow rate, click on the desired fl ow
rate butt on. The new fl ow rate appears in the
display cell.
Scroll Bar
To increase or decrease the displayed rate, use
the scroll bar.
Enter Flow Rate
To enter the displayed fl ow rate into the Rate cell
of the Program Edit Bar, click on OK.
Previous Button
To reset the displayed fl ow rate to the previously
set pump fl ow rate, click on the Previous butt on
in the Scheduler Set Flow window.