SKC DataTrac for the Leland Legacy - Manual (Page 39)

36
Reports
Figure 40. Close-up of the Sample Sheet
Setup Window Showing Active Check Boxes
Load Template .....loads a template fi le
Save Template ......saves a template fi le
Print .......................prints the current sample sheet data displayed on screen
Exit .........................exits the Sample Sheet Setup window and returns to the
previous window
Option Menu
Merge Pump ........writes the pump history from the connected pump
memory to the displayed sample sheet setup and creates
a worker exposure profi le
Merge File .............writes the pump history from a previously stored
history fi le to the displayed sample sheet setup, and
creates a worker exposure profi le
Clear Sample
Sheet ...................clears all entered data from cells
Setup Files
The Sample Sheet Setup window (Figure 39) contains a list of information (in data
cells) that will be printed in a report. The displayed sample sheet setup can be saved
to a PC as a setup fi le (.stp). A setup fi le consists of all the information contained
in all data cells.
Enter Data into Sample Sheet
To enter the information into the data cells, click on the cell then type the data
using a keyboard. The Tab key can be used to move from one cell to the next.
Save Setup
To save all entered data, select the Save Setup command from the File menu.
The Save Setup command saves all data as a setup fi le (.stp).
Template Files
The displayed sample sheet setup can also be saved to a PC as a template fi le (.tpl).
A template fi le reduces the need to repeatedly type data that rarely changes. A
template fi le contains only the information included in the data cells that have an
active check box (the small square butt on before the data cell as shown in Figure
40). To activate a check box, click on it until a check mark appears.