SKC DataTrac for the Leland Legacy - Manual (Page 25)

22
SKC Pump Scheduler
Figure 32.
Time Bump all
Dates Buttons
Figure 30.
Digital Time
Display
Figure 31.
Select Time
Display
Selecting a Time Using the Digital Time Display
The Digital Time display (Figure 30) can also be used to select
the time, especially outside the clock resolution sett ings. Double-
click on the time display to highlight it (Figure 31), then key in
the desired time (including the colon). One or more
numbers can be individually selected by clicking and
dragging across the digit to be changed. Click on the
appropriate time cell in the Program Edit Bar to enter
the time into that cell.
Time Bump all Dates Buttons
The Time Bump all Dates butt ons (Figure 32) add or subtract the
selected time interval to all program Start Time and Stop Time in
the Pump Schedule.
Time Interval
Click on the desired time interval.
Minus (-) Button
To subtract the selected time interval from all
programming steps, click on the (-) butt on.
Plus (+) Button
To add the selected time interval to all programming
steps, click on the (+) butt on.