SKC DataTrac for the Leland Legacy - Manual (Page 31)

28
Example Scheduler Program
To insert the program into the Pump Scheduler:
Click on the Insert butt on. The program appears in the Pump Schedule.
Note that the program is still displayed in the Program Edit Bar. The
Pump Scheduler now has a program that tells the pump to run at a
constant fl ow of 10 L/min from 8:00 AM to 4:00 PM on Monday. The
same operating parameters must be entered for each day of the week.
To add extra days to the program schedule:
Click on the +Day butt on. This will add one day to the Start Date and
Stop Date in the Program Edit Bar. Click on Insert to place the program
into the Pump Scheduler.
Repeat the procedure to add an additional day to the Pump Scheduler
until each day of the week has been entered.