SKC DataTrac for the Leland Legacy - Manual (Page 29)

26
SKC Pump Scheduler
Figure 37. Repeat Scheduler
Repeat Scheduler
To activate the Repeat Scheduler (Figure 37), go to the Repeat Schedule cell in the
Pump Scheduler window and click in the box until a check mark appears. Click on
the desired time frame (daily or weekly) and enter the desired number of cycles in
the Execute Count cell. Enter the desired fl ow rate in the Set Flow cell or click the
Set Flow butt on. Click the ToPump butt on. Go to the View menu and select Preview
Repeat Scheduler. A summary including total run time and volume will appear. The
Repeat Scheduler allows the user to repeat a pump schedule over many weeks. The
schedule can vary from day to day. See pages 27-30 for an example schedule.
There must be a Pump Schedule in place to take advantage of this feature.
Cell/Button Readout/Function
Repeat Schedule Cell ..........click to activate the Repeat Scheduler (check mark)
Daily/Weekly Butt ons .........click desired repeat interval
Execute Count Cell ...............enter number of intervals schedule is to repeat
Set Flow Cell and Butt on ....enter or select pump fl ow rate in L/min