SKC DataTrac for the Leland Legacy - Manual (Page 5)

2
DataTrac Setup
DataTrac Setup
Installing DataTrac Software
Installation of New Software
1. Close all applications.
2. Insert DataTrac Soft ware CD into CD-ROM drive. The CD is set up to autoplay.
If it does not autoplay on your PC, go to Step 2a.
a. Click Start butt on on tool bar.
b. Click on My Computer.
c. Double-click CD Drive.
3. The InstallShield (IS) Welcome window will display.
a. Click Next.
4. The IS License Agreement window will display.
a. Select “I accept the terms . . .” to continue installation. If you do not
accept the terms, the installation will not continue.
b. Click Next.
5. The IS Customer Information window will display.
a. Enter User Name and Organization.
b. Under “Install this application for:” select Anyone who uses this
computer (all users) or Only for me ().
c. Click Next.
6. The IS Destination Folder window will display.
a. To select the default folder into which the soft ware will install, click
Next.
b. To change the default folder to another folder, click Change and browse
to the appropriate folder. Click OK.
c. Click Next.
7. The IS Ready to Install the Program window will display. This is the fi nal point
at which you may change any of the previous sett ings before installation.
a. Click Install to install soft ware with current sett ings.
b. Click Back to change sett ings before installation.
c. Click Cancel if you desire to cancel the installation.
8. The IS Installing Leland Legacy window will display. Installation may take
several minutes. Do not press any keys during installation.
9. The IS Wizard Completed window will display, indicating successful
installation.
a. Click Finish to exit the IS Wizard.
If installation is unsuccessful, an error box will display indicating that installation
was not successful and that the user should perform the installation procedure
again.
A shortcut to Legacy.exe will be installed automatically on the
PC desktop.