Vanguard LTCA-10, LTCA-40, WRM-10P, WRM-40 - Manual (Page 19)

REV 3 LTCA VERSION 2.xx SOFTWARE MANUAL
17
4. The “File Prefix” input field allows you to enter a word that will be used as part of the
file name for the stored record on the PC hard drive. When a test record is retrieved
from an LTCA or WRM and stored on the hard drive, the file name will be in the
following format:
So if you would like the file name to be “SAMPLE1.TEST”, enter the word SAMPLE in the
“File Prefix” input field.
NOTE
Test records that are retrieved from a WRM or LTCA unit will have the “.test”
file extension. If a test record is saved from the LTCA software, it will be given
either the “.tst-wrm” or the “.tst-ltca” file extension, depending on whether
the test was performed using a WRM or LTCA unit, respectively.
5. Click on the “OK” button. The following screen will be displayed:
Select the folder where you would like the retrieved test records to be stored. The
default test record folder will be initially selected. Click on the “OK” button to start
retrieving the selected test records.