Vanguard LTCA-10, LTCA-40, WRM-10P, WRM-40 - Manual (Page 59)

REV 3 LTCA VERSION 2.xx SOFTWARE MANUAL
57
8. Once the resistance reading is stable, the values are displayed in the status section as
shown below:
Click on the “Accept Test” button to save the current reading. The saved reading values
will be listed in the section above the buttons:
The reading values will be saved and testing will continue. You can click on the “Accept
Test” again as many times as necessary to store the current readings. The readings table
will be updated with the stored data:
Click on the “Stop Test” button to stop the test.