Vanguard LTCA-10, LTCA-40, WRM-10P, WRM-40 - Manual (Page 53)

REV 3 LTCA VERSION 2.xx SOFTWARE MANUAL
51
4.7.1. Working with Dynamic Test Results Data Points (LTCA Only)
Dynamic test results are continuous values recorded over time and therefore cannot be
tabulated. However, you can select data points of interest and add them to a set that can then
be printed.
Adding Data Points
1. First expand the graph (see sections 4.6.3) so that you can easily find any points of
interest, and then move the cursor to the point on the graph that you would like to add:
Values will be extracted from
this point.