Vanguard LTCA-10, LTCA-40, WRM-10P, WRM-40 - Manual (Page 26)

LTCA VERSION 2.xx SOFTWARE MANUAL REV 3
24
In the “Test Header Information” section you can also change the reference temperature by
entering a new value in the “Reference Temp” field. You can also add or edit any notes for each
test in the “Notes” section below the test header information. Click on the “OK” button when
done.
If the reference temperature is changed, the LTCA software will re-calculate all the R1s, R2s,
and R3s values based on the new reference temperature. Please make sure to save the test
record in order to retain any changes made.