Vanguard LTCA-10, LTCA-40, WRM-10P, WRM-40 - Manual (Page 28)

LTCA VERSION 2.xx SOFTWARE MANUAL REV 3
26
An additional toolbar will also be displayed just above the report. The toolbar elements are
described below:
1. Tool Selection - Click on the arrow to display the tool selection drop-down menu
a. Zoom In Tool
Select this tool to zoom in on the document. When this tool is selected, you can
click anywhere on the test report and the zoom level will be increased by
approximately 25%.
You can also zoom in on a selected area by clicking and dragging to define a
rectangular area on which to zoom in on.
b. Zoom Out Tool
With this tool selected, you can zoom out of a document by clicking anywhere on
the report. The zoom level will be decreased by approximately 25%.