Vanguard LTCA-10, LTCA-40, WRM-10P, WRM-40 - Manual (Page 55)

REV 3 LTCA VERSION 2.xx SOFTWARE MANUAL
53
column heading. Clicking on the same column heading a second time will reverse the sorting
order.
You can also re-number data points by moving them up or down in the list. To renumber a data
point, click on the data point and then click on either the “Up” or the “Down” button. The data
point’s number and position will be adjusted accordingly.
To delete a data point, click on the data point and then click on the “Delete” button.
NOTE
Be sure to save the test record after adding data points. To save the test record, select
Save Test from the File menu.
You can add comments to a data point by clicking on the “Edit” button. The following screen
will be displayed:
Enter your comment and click on the “OK” button.