Vanguard LTCA-10, LTCA-40, WRM-10P, WRM-40 - Manual (Page 48)

LTCA VERSION 2.xx SOFTWARE MANUAL REV 3
46
4.6.4. Overlaying Test Results Graphs
When viewing the graphic test results for a test record (static or dynamic), you can overlay the
graphic results from up to two other test records for comparison. To overlay test records:
1. Retrieve or open the first test record that you would like to view.
2. Click on the Overlay icon. The following screen will be displayed:
If the test record that you would like to overlay is not in the current directory listed, click
on the folder icon and browse to the folder containing the test record.
Once you have located the second test record, click on its filename. You can select
multiple test records by holding down the [CTRL] key and then clicking on each filename
(maximum of 2 test records). When you have selected the test records to overlay, click
on the “OK” button.
3. The selected test records’ graphs will be overlain on top of the main test record’s graph.
Figure 1 shows a typical dynamic resistance graph with one overlay. Figure 2 shows a
typical static resistance graph with one overlay.