Vanguard LTCA-10, LTCA-40, WRM-10P, WRM-40 - Manual (Page 68)

LTCA VERSION 2.xx SOFTWARE MANUAL REV 3
66
7. Once the transformer has been calibrated, testing will start and the remaining test time
will be displayed in the status section:
8. Testing will automatically stop when the test time has elapsed. The “Save Test” button
will become active. Click on the “Save Test” button. The following screen will be
displayed:
Browse to the folder where you would like to save the test record and then enter the
file name in the “File name:” input field. Click on the “Save” button. The software will
start transferring the data from the LTCA unit and the following status window will be
displayed:
The above window will disappear once the test data has been completely transferred
and the file has been saved in the selected folder. You will be returned to the main LTCA
application window and the test results graph will be displayed.