Vanguard LTCA-10, LTCA-40, WRM-10P, WRM-40 - Manual (Page 21)

REV 3 LTCA VERSION 2.xx SOFTWARE MANUAL
19
4.3 Saving a Test Record
4.3.1. Saving a Test Record with its Original File Name
1. To save a loaded test record with its original file name, click on the Save icon (or click on
the File menu and select Save). The following confirmation window will be displayed:
Click on the “Yes” button to save the test record with its original file name, or click on
the “Cancel” button to cancel the process.
Clicking on the “No” button allows you to save the file with a different file name. Please
see section 4.3.2 below.
4.3.2. Saving a Test Record with a Different File Name
1. To save a test record with a different file name, click on the File menu and select Save
As. The following window will be displayed:
2. Browse to the folder where you would like to save the test record.
3. Enter the file name in the “File name:” input field.
4. Click on the “Save” button.
5. The test record will be saved with the new file name.