Vanguard LTCA-10, LTCA-40, WRM-10P, WRM-40 - Manual (Page 29)

REV 3 LTCA VERSION 2.xx SOFTWARE MANUAL
27
c. Loupe Tool
The loupe tool works like a magnifying glass. When selected, a new “Loupe”
window will be displayed showing an enlargement of the selected area of the
document as shown below:
You can change the zoom level by clicking on the “+” or “-” buttons, by dragging
the slider at the bottom of the window, or by typing a number in the zoom
percentage text box. Click and drag on the test report to change the area that is
magnified.
d. Pan and Zoom Tool
The Pan and Zoom Tool is the opposite of the Loupe Tool. It displays a mini
version of the test report in a new window (as shown below) and allows you to
select an area to show enlarged in the main application window.
You can click and drag the selection window and the main application window
will show this area enlarged. You can change the size of the selection window by
clicking and dragging on any of the 8 control points.
2. 1:1 Zoom – Click on this icon to view the document at 100% scale.
3. Fit Page – Click on this icon to fit the entire page in the application window.