Proface PS4800 - 19 Panel PC" - Manual (Page 116)

Configuration of the BIOS
116
Boot Settings Configuration
Boot Setting Description Setting
Options Effect
Quick Boot This function reduces the boot time by
skipping some POST procedures. Disabled Disables this function.
Enabled Enables this function.
Quiet Boot Determines if POST message or OEM
logo (default = black background) is
displayed. Disabled POST message display.
Enabled OEM logo display instead of POST
message.
Automatic Boot
List Retry With this option, the operating system
attempts to automatically restart
following startup failure. Disabled Disables this function.
Enabled Enables this function.
Add On ROM
Display Mode Sets the display mode for ROM (during
the boot procedure). Force BIOS Displays an additional BIOS part.
Keep Current Displays BIOS information.
Hold On Errors This option sets whether the system
should pause the Power On Self Test
(POST) when it encounters an
anomaly. Disabled The system does not pause. Ignores all
anomalies.
Enabled System pause. The system pauses
every time an anomaly is encountered.
Hit ‘DEL’
Message
Display You can define to display the “Hit ‘DEL’
Message” on startup.
NOTE: When Quiet Boot is enabled,
the message will not display. Disabled The message does not displayed.
Enabled The message will display.
Interrupt 19
Capture Controls BIOS interrupt. Disabled Disables this function.
Enabled Enables this function.
PXE Boot to
LAN (ETH1) Enables/disables the ability to boot
from LAN (ETH1). Disabled Disables this function.
Enabled Enables this function.
Slide-In 2
Optional ROM Enables/disables optional ROM for a
slide-in 2 drive. Disabled Disables this function.
Enabled Enables this function.
Power Loss
Control Determines if the system turns on/off
following power loss. Remain Off Remains off
Turn On Powers on
Last State Enables the previous state.