Caution – Proface PS4800 - 19 Panel PC" User Manual
Page 84
Dimensions/Assembly
84
6
Use a 2,5 hexagon head screwdriver to tighten each of the fastener screws and
secure the Industrial Personal Computer in place:
NOTE: To ensure a high degree of moisture resistance, use a torque of 0.5 N•m
(4.5 lb-in).
7
Ensure that the angle is tilted no more than mounting orientation requirements
allow (see page 79).
CAUTION
OVERTORQUE AND LOOSE HARDWARE
z
Do not exert more than 0.5 N•m (4.5 lb-in) of torque when tightening the
installation fastener, enclosure, accessory, or terminal block screws. Tightening
the screws with excessive force can damage the plastic casing of the Industrial
Personal Computer.
z
When installing or removing screws, ensure that they do not fall inside the
Industrial Personal Computer chassis.
Failure to follow these instructions can result in injury or equipment damage.
Step
Action