Proface PS4800 - 19 Panel PC" - Manual (Page 148)

System Monitor
148
Battery - System Monitor Properties
NOTE: Only available for the models with UPS Interface Board Products.
The screenshot below shows the Battery tab:
Error Action Configuration
Field Description
Monitor the function of the
built-in hard disks Select this check box to enable and begin monitoring the
built-in hard disks. When enabled (see page 148), set the
Error action.
Field Description
Monitor the status of the
installed battery unit (UPS) Select this check box to enable and begin monitoring the
installed UPS battery unit. When enabled (see page 148),
set the Error action.
Field Description
Turn on buzzer Select this check box to enable the buzzer.
Play sound Select this check box to enable the sound that is used for
all detected errors. Specify the sound file path (Browse...
button).
Show popup message When this check box is selected, status messages are
diplayed in the form of a popup.
Shutdown system If you want the system to stop when an error is detected,
select this check box. Not availbale in SMART tab.