Proface FP3900 - 19 Flat Panel" - Manual (Page 130)

Chapter 6 Setting up and Adjusting the FP unit
6-5
6.2 Screen Display Adjustment
6.2.1 Calibration of OSD Display Position
You can operate the FP screen menus via the touch panel, and adjust screen image display to a minute level.
The feature is called OSD (On Screen Display).
This section describes items and functions that can be set with OSD.
(1) How to start the OSD
„Starting the OSD
To start the OSD and enter OSD mode, press the three
corners of the touch panel in the following order
(upper left (1) a upper right (2) a lower right (3))
within 5 seconds. In OSD mode, the setting screen is
displayed in the center of the screen. In this mode, the
touch panel cannot be used to export data to external
devices unless the settings for the OSD are completed.
(2) Main Menu
• OSD is not displayed when a SW
1-2 is ON.
Displayed screen
(1) (2)
(3)
„Using the OSD
Icons on the screen are used to operate the OSD.
When you start up the OSD, the top menu displays.
Touching the icon of the item you want to adjust
displays its submenu or setting change screen. In the
setting change screen, icons are used to
change the setting. To set the setting, press the
button. Press the button to save the
defined settings.
„Quitting the OSD
To quit the OSD, press the or button
in the top menu or leave the OSD as it is for at least
30 seconds.
“Ver.*.**” indicates the version of the OSD.