Proface FP3900 - 19 Flat Panel" - Manual (Page 91)

FP3000 Series User Manual
4-52
„USB Interface (Up-stream port)
‹ USB Interface Pin Assignments and Signal Names
Connector........................... USB 2.0 / USB 1.1 compliant
Connector set screw........... Type B connector
Cable.................................. USB cable manufactured by Pro-face
(FP-US00)
For using USB Interface, equal to or higher version of a Windows
®
2000(SP4) or Windows
®
XP(SP1) is
required.
USB Interface
USB 2.0/1.1 compliant
Supported speed
• Low (1.5 Mbps)
• Full (12 Mbps)
• Hi (480 Mbps)
Communication distance (Max): 5m
The USB Interface is supported by a host PC
equipped with Windows
®
2000(SP4) or later, or
Windows
®
XP(SP1) or later.
Pin
No.
Signal Name Condition Pin Location
1 USB1-5V +5VIN
2 USBD1(-) USB data(-)
3 USBD1(+) USB data(+)
4 GND Ground
• If a cable other than the specified USB cable is used, product performance
cannot be guaranteed due to the possibility of noise interfering with the FP unit’s
operation.
4 3
2 1