Brocade NetIron CER 2000 Series Hardware Guide (Supporting R05.6.00) - Manual (Page 19)

Brocade NetIron CES 2000 Series and NetIron CER 2000 Series Hardware Installation Guide 9
53-1003029-02
Hardware features
1
Hardware features
This section describes the physical characteristics of the Brocade NetIron CES 2000 Series 2000
and NetIron CER 2000 Series 2000 Series devices. For details about physical dimensions, power
supply specifications, and pinouts, refer to the
“Hardware specifications” on page 59.
The following figures show the front panels of the various NetIron 2024 and 2048 devices.
NOTE
This is only a representative sample. For the exact model, look at the faceplate on the front of the
device. Both CER and CES devices have similar look and feel.
Brocade NetIron CES 2000 Series 2024C-4X
The Brocade NetIron CES 2000 Series 2024C-4X switch has twenty-four 10/100/1000 MbE RJ45
ports plus four combination 100/ 1000 MbE SFP ports, 4-port 10 GbE SFP+ module, one DB9
serial management interface port labeled Console, one 10/100/1000 MbE RJ45 out-of-band
management port, one resilient six-unit fan tray, and two AC power supply bays for 1+1 redundancy
with one 500W AC power supply included.
FIGURE 19 Brocade NetIron CES 2000 Series 2024C-4X device
Brocade NetIron CES 2000 Series 2024F-4X
The Brocade NetIron CES 2000 Series 2024F-4X has twenty-four 100/1000 MbE SFP ports plus
four combination 10/100/1000 MbE RJ45 ports, 4-port 10 GbE SFP+ module, one DB9 serial
management interface port labeled Console, one 10/100/1000 MbE RJ45 out-of-band
management port, one resilient six-unit fan tray, and two AC power supply bays for 1+1 redundancy
with one 500W AC power supply included.
FIGURE 20 Brocade NetIron CES 2000 Series 2024F-4X device
1 10 GbE SFP+ ports
2 Four combination 100/1000 MbE SFP ports
3 Twenty-four 10/100/1000 MbE RJ45 ports